Salvajor S914 Food waste Collector with rinsing flume 230v
-
£11,299.00 (ex VAT)
- Product Code:Salvajor S914 Food waste Collector with rinsing flume
Product Status : 6-8 Week Lead Time
Product Status : 6-8 Week Lead Time
These Salvajor high output food waste collectors are ideal for operators who are not allowed to put food waste into their waste system, or whose waste system is prone to blockages. They can reduce bulk food waste by as much as 50% and weight by as much as 80%, non soluble waste is collected in a basket to be tipped into a waste bin. Using the high speed re-circulating water flume, instead of an overhead pre rinse arm, rinsing time is greatly reduced as the operator can use both hands whilst at the same time reducing water spillage on the floor. Pans and plates can be left soaking whilst rinsing continues. As water is constantly re-circulated for rinsing water consumption is greatly reduced - these units only uses 7 litres of fresh water per minute whilst the machine is running.
- Collector baskets allows soluble waste to pass through it then collects non soluble food waste - its does not go into the waste system
- Designed to be "dropped" into a work top - Cutout size 628.7mm x 565.2mm
- Low water consumption - 8 litres of fresh water per minute
- Inbuilt sensor switches off the water plume when the operator is not in front of the machine - saves energy
- Powerful re-circulating water flume - recirculates at 113 litres per minute
- Water flume can be adjusted in height depending on product being rinsed
- Water flume has adjustable temperature setting
- Problem dishes, trays and cookware with dried or baked on food need much less hard work, they can be soaked in the Collector basin while scrapping continues on other dishes.
- Scrapping speed is more than double compared to using a Overhead pre-rinse arm as the operator can use both hands
- Non clogging Powerful 3.4h.p pump - with thermal protection
- Supplied with waterproof control panel - can be mounted to the left or right on installation
- Supplied with water Backflow prevention device
- Supplied with 1 x High impact polymer plastic scrap basket and tank cover
- All stainless steel construction including legs
- Supplied as a complete unit or can be supplied in 2 parts so can be welded into an existing work top.
- Warranty - 2 years parts and 1 year labour
- 230V/50ph/1-phase 5.5 amps
- 115 Volt 1 phase
- 208 Volt 1 phase
- 208 Volt -3 phase
- 230Volt 3 phase
- 460 Volt -3 phase
- Please stipulate at checkout Voltage
