Insinger Ensign 40-2 Counter Type Dishwasher

Product Status : Pre-Order

43 racks per hour
•0.75 gallons per rack final rinse consumption
•Easy operation with pass-thru telescoping hood
•Convenient counter top installation
•Space-saving
•No vent required
•SureFire® Start-Up & Check-Out Service

Automatic counter type single tank dishwasher with pass-thru telescoping hood ƒ 0.75 gallons/rack ƒ Capacity is 43- 16" x 16" racks per hour or 720 dishes ƒ No venting required ƒ A timed wash and rinse cycle ƒ Fully automatic operation with power on/off button ƒ Cycle starts when door is closed

Tank heat: electric immersion heater ƒ Thermometer for wash ƒ Thermometer for final rinse ƒ Vacuum breaker ƒ Manifold clean-out brush ƒ Automatic tank fill ƒ Low water protection ƒ Detergent connection provision ƒ Space saving compact design ƒ Single point electrical connection: motor, controls, tank heat. (Optional booster requires separate connection) ƒ Fully automatic operation ƒ Side mounted control panel (NEMA 12) ƒ Simplified scrap screen design ƒ Standard frame drip proof motor ƒ Door safety switch ƒ SureFire® Start-Up and Check-Out Service OPTIONS … Stainless steel steam coil tank heat … Pressure reduction valve and line strainer … S/S frame … Steam booster … Remote electric booster … Totally enclosed motor … Plastic 16" x 16" rack (plate or silver)

Capacity Per Hour 43 racks 720 dishes Tank Capacity 8.1 gallons Motor Size 1/2 hp (wash) Electric Usage 1.5 kW wash tank 6 kW booster 40° rise 12 kW booster 70° rise Steam Consumption at 20 psi min. 6 lbs./hour tank 22 lbs./hour remote booster 40° rise 38 lbs./hour remote booster 70° rise Final Rinse Peak Flow at 20 psi min. 4.1 gallons/minute Final Rinse Consumption at 20 psi min. 34 gallons/hour 0.75 gallons/rack Exhaust Hood Requirement N/A Peak Rate Drain Flow 9 gallons/minute Shipping Weight 400 lbs. Note: Due to product improvement we reserve the right to change information and specifications without notice. Current Draw Amps 115/1/60 240/1/60 208/3/60 240/3/60 480/3/60 380/3/50 Steam 10.7 5.5 2.7 2.4 1.4 1.5 Electric w/o booster 23.7 11.8 6.9 6.0 3.1 3.8

SPECIFICATIONS CONSTRUCTION- Hood and tank constructed of 16 gauge type 304 S/S. Hood unit of all welded seamless construction. All internal castings are non-corrosive lead free nickel alloy or bronze. DOORS- Two opening operating doors. Operating doors have fingertip control, rotating on S/S bracket. Doors formed of 18 gauge S/S. PUMP- Centrifugal type “packless” pump with a brass petcock drain. Construction includes ceramic seal and a balanced cast impeller on a precision ground stainless steel shaft, extension or sleeve. All working parts mounted as an assembly and removable as a unit without disturbing pump housing. One 1/2 hp motor, standard horizontal C-face frame, drip proof, internally cooled with ball-bearing construction. CONTROLS- Side-mounted control cabinet, housing motor controls and overload protection, transformer, contactors and all dishwasher integral controls. All controls safe low voltage 24 VAC. SPRAY SYSTEM- Wash and rinse spray systems made of 18-8 type 304 S/S pipe. WASH- Power wash arm above with 14 high pressure action cleaning slots and 6 power wash arms below, each designed with 5 high pressure action cleansing slots. The slots are precision milled for water control producing a fan spray. Wash arms are removable without the use of tools. FINAL RINSE- 1 spray body above designed with 4 power rinse nozzles and 1 power rinse coil below designed with 6 nozzles. DRAIN- Overflow assembly with skimmer is removable without use of tools for drain line inspection. Heater protected by low water level controls