Product Status : 2-3 Days

Touch Free Electronic Tap activated when the user brings hands within
the sensor range for ultimate hygiene that prevents
cross-contamination.
Water Supply: Single inlet cold or pre-mixed water up to 70C. Power
Source: Plug-in; 9 Volt transformers (supplied), or 9 Volt Battery.
Flow time once user's hands are removed from the tap - 1 second (adjustable by using remove control DB51).
Can be installed in counter thickness from just 2mm to 27mm! Greater water flow rates of 6ltrs a minute!
Option of two durable finishes: Polished Chrome Plating or Brushed Nickel PlatingTap settings may be adjusted manually or by using remote control DB51Filters, fixing bolts, installation instructions and power source supplied with each tapElectronic infrared sensor pre-set at 220mm, minimum 80mm and maximum sensor range 300mmTo be installed minimum 300mm above bottom of basinsPower Connections: tap male, power source femaleCounter hole: Ø 28-34mm Min-max thickness 2-27mmOperating pressure 1.0 - 8.0 bar (14.5 - 116 PSI) Maximum water inlet temperature 70CFlow rate – 6 litres /minuteDB 125 comes complete with a DB 80 Battery Backup deviceWRAS Approved Product
Order code
Description |
Dimensions |
Projection |
Finish |
| DB100C |
9v Battery (PP3) |
H172 x Ø44mm |
135mm |
Polished Chrome Plating |
| DB100S |
9v Battery (PP3) |
H172 x Ø44mm |
135mm |
Brushed Nickel Plating |
| DB125C |
9v Transformer tap |
H172 x Ø44mm |
135mm |
Polished Chrome Plating |
DB125S |
9v Transformer tap |
H172 x Ø44mm |
135mm |
Brushed Nickel Plating