DB225S-2 Series Dolphin Chrome Plated Brass Infrared Sensor Tap
-
£450.00 (ex VAT)
- Product Code:DB225S-2 Series Dolphin Chrome Plated Brass Infrared Sensor
Product Status : 2-3 Days
Product Status : 2-3 Days
The touch Free system of the Dolphin DBL200/DBL225 Series tap will allow water to flow when hands are detected by the infrared sensor, so water waste significantly decreases in high traffic locations. This infrared sensor tap by Dolphin has an elegant and unique design, ideal for high finish locations. Water temperature will be constant, whether cold or premixed, which will prevent visitors from scalding. DB200C / DB200S-2 will operate using a 9 volt battery that will provide a warning when power is low. DB225C /DB225S-2 will operate using a plug in 9 volt transformer. For anymore specific specifications/requirements, please refer to the Spec Sheet and/or Install and User Manual.
Hygiene flush feature runs the tap for 25 seconds, 24 hours after the last use of the tap. This flush time or 24 hours interval cannot be changed and is not based on real time, the feature can only be switched on or off using a compatible remote control (DB51). Taps are supplied with this feature switched on.
Dimensions: 142 Height , 50 Diameter , 60 Projection (mm)
- Operation: Plug In 9 Volt Transformers or 9 Volt Battery (With Low Battery Warning)
- Flow Rate: 3.5 Litres per Minute
- Connector: 3/8" BSP Water Supply Connector
- Mounting: Deck Mounted
- Dimensions: 142 H , 50 D , 60 P (mm)
- Touch Free
- Materials: Quality Chrome Plated Brass
- Minimum/Maximum Flow Pressure: 0.5bar/6bar
- Type of Water Mixing: Cold or premixed via Thermostatic Mixer
- WRAS Approved
- Hygiene Flush
