BIRO MODEL AFMG-56 MK III MIXER GRINDER
-
£47,829.00 (ex VAT)
- Product Code:BIRO MODEL AFMG-56 MK III MIXER GRINDER
Product Status : Pre-Order
Product Status : Pre-Order
By using the BIRO Model AFMG- 56MKIII Mixer-Grinder, you can start increasing the output of your grinding operation without having to spend a fortune.
The 800 lb. (363 kg) hopper gives you the kind of capacity you need; the 20HP (15 kW) auger motor gives you the power you need. The 5HP (3.7 kW) mixer motor is strong enough that it won’t bog down with a full hopper; the twin mixing paddles give you a thorough mix. Safety interlocks and a pneumatic lift for the lid help ensure safety; the machine has watertight controls and totally enclosed motors so you can do a full wash-down cleanup. The hopper and frame are constructed of heavy duty stainless steel so it resists damage and corrosion. As with all BIRO designed and built machines, you get the benefit of over 90 years of engineering experience in building meat processing equipment.
Model AFMG-56MKIII-50, 15 kw, 220/380-415-50-3, 363 kg Hopper, approx. 91 kg/mi
Automatic Feed Mixer-Grinders F.O.B. Mansfield, Ohio expect Model AFMG-24 and MINI-32, F.O.B. Canton, Ohio
Model Mini-22 & Models AFMG-56 Series F.O.B. Marblehead, Ohio
SPECIFICATIONS
MODEL
AFMG-56MK III AUTO-FEED MIXER GRINDER.
CONSTRUCTION
HEAVY DUTY STAINLESS STEEL HOPPER, LID, PADDLES, FRAME AND LEGS, STAINLESS STEEL SIZE 56 BOWL, RING AND AUGER.
MOTORS
| MOTOR | HP | KW | TYPE | VOLTS | AMPS | CYCLE | PH | STATUS |
|---|---|---|---|---|---|---|---|---|
| AUGER | 20 | 15 | TEFC | 208-230/460 | 53-48/24 | 60 | 3 | STD |
| MIXER | 5 | 3.7 | TEFC | 208-230/460 | 14-13/6.6 | 60 | 3 | STD |
| AUGER | 20 | 15 | TEFC | 200 | 55 | 60 | 3 | EC |
| MIXER | 5 | 3.7 | TEFC | 200 | 15.9 | 60 | 3 | EC |
| AUGER | 20 | 15 | TEFC | 575 | 26 | 60 | 3 | EC |
| MIXER | 5 | 3.7 | TEFC | 575 | 5.2 | 60 | 3 | EC |
| AUGER | 20 | 15 | TEFC | 220/380-415 | 56/29.3-27 | 50 | 3 | EC |
| MIXER | 5 | 3.7 | TEFC | 220/380-415 | 14/8.1-7.4 | 50 | 3 | EC |
TEFC= TOTALLY ENCLOSED FAN COOLED STD=STANDARD EC=EXTRA COST
SWITCH
WATERTIGHT MAGNETIC CONTROLLER WITH THERMAL OVERLOAD AND UNDER VOLTAGE PROTECTION, SEPARATE MIX AND GRIND CONTROLS, PRODUCT MIX TIMER IS FACTORY PRESET FOR 2 MINUTES MIX AND 5 MINUTES OFF SEQUENCE.
POWER CORD
WIRED ON THE LOW SIDE (200-240) VOLT OPERATION: 9’ (2.7 M) NO. 4 GA. WIRE CONDUCTOR POWER CORD – LESS PLUG. WIRED ON THE HIGH SIDE (380-480) VOLT OPERATION: 9’ (2.7 M) NO. 8 GA. WIRE CONDUCTOR POWER CORD – LESS PLUG. WIRED (575) VOLT OPERATION: 9’ (2.7 M) NO. 10 GA. WIRE CONDUCTOR POWER CORD – LESS PLUG.
HOPPER CAPACITY
UP TO 800 LBS. (363 KG).
GRINDING CAPACITY
UP TO 250 LBS. (113 KG) OUTPUT PER MINUTE.
DRIVE SYSTEM
AUGER – 20HP (15 KW) T.E.F.C. INDUSTRIAL MOTOR, SINGLE REDUCTION SILENT CHAIN. MIXER FEED PADDLES – 5HP (3.7 KW) T.E.F.C. HEAVY DUTY DOUBLE REDUCTION GEAR BOX AND HEAVY DUTY OPEN FACE GEAR DRIVE.
SAFETY
MAGNETIC SAFETY INTERLOCK ON HOPPER LID.
STANDARD FEATURES
HOPPER WITHOUT SIDE FEED INLET, PRESET PNEUMATIC (45 P.S.I.) LID OPENER ON RIGHT SIDE (WHEN FACING BOWL), STAINLESS STEEL SPURT GUARD, RING WRENCH, OPERATING AND SAFETY MANUAL, 11” (280 MM) STAINLESS STEEL ADJUSTABLE THREADED LEGS MOUNTED ON FLOOR PADS. NOTE – IF MACHINE IS RAISED TO 8” (203 MM) OR MORE OF EXPOSED THREADS, THE MACHINE MUST HAVE REINFORCING CROSS LEG BRACE (#60142NE).
OPTIONS (NC)
PNEUMATIC LID OPENER (45 P.S.I.) ON LEFT SIDE (WHEN FACING BOWL).
OPTIONS (EC)
SIZE 56 KNIFE AND PLATE, 6” (152 MM) DIAMETER SWIVEL SIDE LOCK CASTORS, 11” (280 MM) STAINLESS STEEL ADJUSTABLE STUDS MOUNTED ON CASTOR PADS. NOTE – IF MACHINE IS RAISED MORE THAN 8” (203 MM) OF EXPOSED THREAD A STAINLESS STEEL CROSS BRACE (#60142NE) IS REQUIRED. HOPPER VIEW, FOLD UP STEP ON LEFT OR RIGHT SIDE 18”WIDE (46 CM) X 19-¾” DEEP (50 CM), CONTINUOUS FEED GRILL STYLE LID (IN PLACE OF STD. FLAT LID), RIGHT OR LEFT LID OPENING, ALSO AVAILABLE WITH CONVEYOR PRODUCT FEED CHUTE MOUNTED ON RIGHT, REAR OR LEFT SIDE OF GRILL LID.
TANDEM OPTIONS (EC)
REQUIREMENTS FOR TANDEM OPERATION: SIZE 56 TO 56 RIGHT OR LEFT SIDE HOPPER 90° PRODUCT FEED INLET, SIZE 56 TO 56 DISCHARGE HORN, HORN SEAL, AND CONNECTING BRACKET, 14” (35.6 CM) O.A.L. ADJUSTABLE LEG ASSEMBLY MOUNTED ON 4 CASTOR PADS (CROSS BRACE AND CASTORS REQUIRED, SEE ABOVE OPTIONS).
CERTIFICATION
C.F.I.A.
WEIGHT
UNCRATED: 1800 LBS. (817 KG) APPROXIMATE WOOD CRATED: 2526 LBS. (1146 KG) APPROXIMATE
CRATED DIMENSIONS
L = 73” (185 CM), W = 65” (165 CM), H = 82” (208 CM)
Item Number
LIT AFMG-56 MK III-309
