DoughXpress DXE-SS Auto- Electric Pizza Press 230

Product Status : 6-8 Week Lead Time

The DXE-SS electromechanical stainless steel model automatically presses dough balls up to an 18″ pizza without the use of hydraulics or an accessory air compressor, saving you valuable space for enhanced efficiency. The DXE-SS has easy-to-use controls that require virtually no training. Set your time, temperature, and thickness, and it will give you consistent results every time.

Dough flow is important, and this unit’s Upper Platens are heated to aid in dough flow. This unit allows dough to be pressed straight from refrigeration, keeping the dough from shrinking back. The heated platen keeps the dough from sticking to the upper platen and will help activate yeast for faster proofing, if desired.

The DXE-SS Variable Thickness Control makes it possible to achieve desired thickness and ensures consistent thickness at the same dough ball weight. The DXE-SS requires no skilled labor, unlike hand tossing. Our presses are safe and have no age requirements, unlike sheet/roller equipment. The DXE-SS is one of the easiest presses to use and operate.

To operate, prepare dough ball, set temp and thickness, center the dough ball on the lower platen, and press the dough. Plus, the DXE-SS is easy to clean. To clean, wipe down with a moist towel or sponge (with minimal soap) and towel dry. The right amount of support for your pizza operations.

DXE Electomechanical Pizza Press Features:

• Digital time and temperature controls.
  
• Infinite range thickness adjustment.
• Swing out design for easy placement of dough.
• Presses dough balls into pizzas up to 18" in diameter.
• Illuminated power on button.
• Two start buttons for hands clear operation.
• Easy to clean stainless steel.
• Optional non-stick coated upper and lower platens.
• Emergency stop button.
• Optional carts with stainless steel top, shelf, and locking wheels available.
• Sleek, modern design that is only 22"H x 18" W x 25" D.
• 25-1/8" H × 18-3/16" W × 24-11/16" D
• Heated Upper Platen 

  • Aids dough flow
  • Allows dough to be pressed straight from refrigeration unit
  • Helps keep dough from shrinking back
  • Keeps dough from sticking to upper platen
  • Will help activate yeast for faster proofing if desired

  Variable Thickness Control 

  • Makes it possible to achieve desired thickness and ensures consistent thickness at the same dough ball weight.

  Production 

  • 18” platen allows for making variable crust sizes and thickness up to 18 inches. The size of the crust is determined by the weight of the dough ball and the thickness setting.
  • Depends on the desired size of the crust:
    9” to 18” = 150-200/hr.
    7” to 9” = 300-400/hr.
    6” or under = 600-800/hr.

  Pressing Tips 

  • Recommended Time:
    Warm dough, moderate to high
    yeast…2 seconds
    Cold dough, moderate
    yeast…4-6 seconds
    Cold dough, small amount of
    yeast…8 seconds
  • Recommended Temperature:
    Warm dough…110°F
    Cold dough…150°F

  Labor 

  • Presses require no skilled labor, unlike hand tossing.
  • Presses are safe and have no age requirements, unlike sheeters/rollers.

  Use 

  • DXE-SS is easy to use. Prepare dough balls, set temp/thickness, place dough ball in center of lower platen and press the dough.

  Finished Product 

  • Pressed dough keeps air in the crust, unlike sheeted dough where the air is forced out of the crust. Pressed dough is consistent in thickness and size, unlike hand tossed where the thickness and size can be inconsistent.
  
  
  Features Include

  • Digital temperature control displays current reading
  • Digital timer (count down begins automatically when platen lowers and resets after the platen raises)
  • Full range thickness adjustment from paper thin to 7/8”
  • Bottom swing out design saves space and is easier to use than top swinging models
  • Illuminated On/Off switch
  • Two start buttons for hands clear operation
  • Heat indicating light that turns off when set temperature is reached
  • Flattens dough balls into pizzas up to 18” in diameter
  • Stainless steel exterior with aluminum upper and lower platens
  • Sleek, modern, durable, easy to clean design
  • Emergency stop button

   
  Optional Features

  • Non-stick PTFE coated upper and lower platens
  • Powder coated white finish

  • Width: 18 3/16 inches, 46.2 centimeters Height: 25-1/8 inches, 63.8 centimeters Depth: 24-11/16 inches, 62.7 centimeters
    WEIGHT
    Shipping: 250 lbs
    ELECTRICAL
    230 Volt/60 Hz | 220 Volt/60 Hz 1150 Watts | 1150 Watts 10 Amps | 9 Amps Standard 5-15P NEMA Plug on 120v 6-15P NEMA Plug on 220v
    AIR
    100-130 PSI Inlet, 1 CFM See Compressor Specifications (Separate).
    TEMPERATURE RANGE
    Off-200°F, 93°C upper platen